The polishing tool consists of a sander, attached with abrasive cloth, sandpaper, and a grinding wheel. During the polishing process, countless abrasive particles are used to cut the surface of the stone garden decorative plastic to achieve a smooth finish.
Grinding Wheel: Used for rough grinding of stone garden decorative surfaces. It is mostly used for polishing internal structural steel.
Sandpaper: used for matte sandpaper and water-resistant sandpaper. Water-resistant sandpaper is used for sanding stone garden decorative surfaces in water or oil.
2. Mirror effect
The mirror polishing effect is divided into two parts: pre-polishing and fine polishing: Pre-polishing is to first use a hard or harder polishing wheel to surface treat the polished stone garden decorative surface.
The fine polishing part uses a soft wheel to further process the pre-polished surface to remove the traces left by the pre-polishing, so that the Stone Garden Decor can obtain a bright mirror-like surface effect.
3. Other effects
A brief introduction to the basic characteristics of stone garden decorative sculptures: Colored steel stone sculpture are an indispensable form of expression in today's urban stone sculpture. Stone garden decorative plastic mainly relies on the Stone Garden Decor foundation. It can be spray-painted on the surface. In order to save costs, it can be directly processed and formed with carbon steel plates and then spray-painted on the surface. In short, after spray painting on the stainless steel surface, it will last for a long time. Use this method if possible. The surface painting of carbon steel plates generally lasts for 1-2 years. If you want to maintain the long-lasting color effect of the stone garden decorative surface, you must regularly spray paint and maintain it. It is recommended not to use this method.